Inspection checklist
- Identify where it happens
- Match seals to the opening
- Distinguish air from water problems
A draft does not automatically mean the entire door needs replacing. The path of the air and the condition of the opening should guide the recommendation.
Use these points to understand the opening or system before choosing parts or approving a larger replacement.
Call or send photos with your ZIP code. We review the visible condition, confirm the service area and schedule an on-site estimate when measurements or equipment identification are required. On site, we verify dimensions, identify compatible parts and explain the work before the customer approves a repair or installation.
Describe whether air is felt at the bottom, hinge edge, latch side or perimeter of the frame. Note any visible daylight or seasonal change. These observations help separate a worn seal from a fit or surrounding-opening problem.
A sweep or weatherstrip needs to suit the door’s design and movement. Adding a thicker seal can make latching harder if clearance is wrong. Threshold condition and door alignment should be reviewed before parts are selected.
Water staining, soft material or recurring moisture may require a broader investigation. A seal replacement is not a promise to solve every leak. Ask what the proposed work addresses and which conditions need a separate assessment.
No. It addresses a suitable bottom gap, not leaks at hinges, frame joints or other parts of the opening.
Sometimes. Sound doors and frames may benefit from alignment or compatible seals; deteriorated components may require replacement.
Send the full exterior and interior opening, threshold and the area where the draft or damage is noticeable.
Send photos and your ZIP code, or call 770 Doors & Windows directly.