Home / Services / Access Control

CONTROLLED ENTRY

Access Control Installation in Nassau County / Suffolk County

Access control installation, repair and system upgrades for offices, apartment buildings and commercial entrances across Nassau County, Suffolk County and NYC. Plan card-reader, key-fob, keypad or compatible mobile entry around your doors and users. Request a free on-site installation estimate.

Modern access control panel beside a building entry door
Equipment & entrance inspiration

Access Control Systems on Long Island

770 Doors & Windows installs, repairs and upgrades door access control systems across Nassau and Suffolk County. A system can manage one office door or multiple entrances using cards, key fobs, PIN codes or compatible mobile credentials. We assess the entrance hardware, power, wiring and user permissions together so the proposed system fits how your property operates.

For a new installation, send the number of doors and users, your town or ZIP, and entrance photos. For a fault, describe whether the reader responds, the lock releases and the door closes. Call (347) 541-4824 to confirm same-day service availability and the appropriate appointment.

Installation, replacement and system upgrades

We start with a door-by-door survey. Door material, frame condition, the existing latch, closer and exit hardware affect the locking options. We then review where readers and controllers can be mounted, the cable route, power supply capacity and any network connection. An electric strike and a magnetic lock need different preparation; the release and exit arrangements are reviewed for the actual property.

Entry optionWhat to decide before installation
Cards and key fobsWho receives credentials, who can deactivate a lost fob, and which doors each user can open.
Keypad entryIndividual versus shared codes, access schedules and the process for changing access when a user leaves.
Mobile or remote entryCompatible phones and readers, network requirements, administrator ownership and any manufacturer subscription.
Intercom integrationHow visitors reach a resident or receptionist and how an authorized call releases the correct entrance.

For an office, define staff hours, delivery access and restricted rooms. For a shared residential building, separate resident credentials from visitor calling. For a storefront or other commercial entrance, review daily door traffic and opening schedules. These are planning options, not a promise that every product supports every function.

Can existing equipment stay?

Often some components can remain, but compatibility needs checking. Send model labels for the reader, controller, power supply and locking hardware. We check credential formats, controller capacity and the condition of existing wiring before proposing reuse, a partial upgrade or replacement.

What the installation estimate should include

The written scope should identify equipment, cable work, door hardware, programming, user setup and training. Confirm software fees and other trades separately. Door count, wiring access and the condition of the entrance affect price and timing; a photograph alone cannot establish every installation requirement.

Testing and handover

Before handover, test approved credentials, agreed schedules, visitor release and the installed exit controls. Confirm normal closing and re-engagement, explain how to remove a lost credential, and record who owns the administrator account. Keep the agreed model details and support information with the property records.

Access Control Installation in Nassau County / Suffolk County

For a new access control installation in Nassau or Suffolk County, start with the number of doors and users, the entrance hardware and who will manage credentials. We review readers, key fobs, keypads, controllers, cable routes, power and authorized release together before specifying a system.

The written scope should identify equipment, wiring, programming, user schedules and administrator handover. Existing locks, controllers and wiring can remain only when compatible and in suitable condition. Confirm software fees and related trades separately. Testing includes authorized credentials, exit controls, normal closing and relocking.

Service coverage includes Nassau County and Suffolk County. Send the town or ZIP and photos so we can confirm the work and schedule. Call (347) 541-4824 or request service. Never send private access codes or passwords.

Find access control service by town, neighborhood or ZIP

Choose your Long Island area for existing local service details. These links describe service coverage, not branch offices. Postal names, ZIP codes and neighborhood boundaries can differ; send the full address so we can confirm availability and the work required.

Nassau County towns and ZIP codes
Suffolk County towns and ZIP codes
More Nassau County neighborhoods
Baldwin / Freeport / Glen Cove area
Bethpage / Levittown / Syosset area
East Hills area
Elmont area
Flower Hill area
Garden City area
Great Neck area area
Hempstead / Uniondale / West Hempstead area
Hicksville area
Long Beach area
Manhasset area
Massapequa area
Merrick area
Plandome Manor area
Port Washington area area
Roslyn / Roslyn Heights area
Sands Point area
Westbury area
More Suffolk County neighborhoods
Babylon / Islip area
Brookhaven Town area
Commack area
Fire Island area
Hauppauge area
Huntington / Huntington Bay / Melville area
Montauk area
Shelter Island area
Smithtown / St. James area
Southold / North Fork area
Springs / East Hampton area

Search another neighborhood or ZIP · Back to Long Island access control · Home

Service illustration: Access control wiring, controller and power supply diagnostics
Access control wiring, controller and power supply diagnostics. Service illustration.
Service illustration: Electric strike adjustment and repair at a building entrance
Electric strike adjustment and repair at a building entrance. Service illustration.
Service illustration: A technician works on a magnetic door lock while customers observe
A technician works on a magnetic door lock while customers observe. Service illustration.
Service illustration: A technician checks access control wiring at an office entrance
A technician checks access control wiring at an office entrance. Service illustration.

Agree on a door-by-door installation scope

An access-control proposal should list each controlled entrance, its lock and release hardware, the required reader or keypad and the approved user groups. For NYC and Long Island properties, this makes equipment selection and programming reviewable before work begins. Handover should identify who administers users and how the completed doors were tested.

What should an installation estimate identify beyond the reader?

It should explain the included door hardware, power equipment, cable work, controller capacity and setup. Confirm any network, account or ongoing service requirements for the proposed system as part of the agreed scope.

Scope and next steps for access-control installation

Process, estimate factors and what to send

How the work is assessed and completed

  1. Survey each controlled door, existing hardware, cable access and the intended users.
  2. Agree on readers or keypads, controller capacity, power equipment, permissions and administration ownership.
  3. Install and program the agreed system, then test approved entry, exit and door securing with the customer.

What affects the estimate

Door count, credential type, reusable hardware, cable routes and programming requirements shape the installation estimate.

The written scope should identify the approved work, included equipment and any separate work before you authorize the job.

Details for your access-control installation request

Provide the number of entrances and users, property type, desired entry methods and photos of existing door hardware.

Include the property address or ZIP and who can provide access.

Request access-control installation · Call (347) 541-4824

ACCESS CONTROL

The right people. The right access.

01

Your doors

The opening, lock and release hardware.

02

Your people

Key fobs, cards, keypads and permissions.

03

Your daily routine

User changes, schedules and handover.

Same-day service: call to confirm availability for your ZIP code, job scope and required parts. New system installations may need a separate appointment. Free on-site estimate. Work and pricing are explained before you approve.

Plan the door, credentials and daily administration

Start with the number of controlled doors, the users who need access and who will manage changes. An office may need staff schedules and a way to remove a lost credential. A residential entrance also needs a visitor plan. We identify the reader, controller, power and locking interface as one scope.

The existing door must close and latch reliably. We inspect the door, frame, closer and release hardware before recommending equipment. Product selection, emergency exit arrangements and any work by another trade are reviewed for the actual property; one lock type is not suitable for every entrance.

Access control installation in Brooklyn

We install card-reader, key-fob and keypad entry for Brooklyn apartment buildings, offices and commercial entrances. For a new system, send the neighborhood or ZIP code, number of doors, approximate user count and photos of the entrance. We review cable routes, power, locking hardware, visitor access and who will manage credentials before preparing the installation scope.

A shared residential entrance may need resident credentials and a compatible visitor intercom; an office may need staff access schedules and a process for removing lost fobs. See access control installation in Bensonhurst or installation in Crown Heights for local service information. Use the neighborhood directory below for other Brooklyn locations.

If an existing reader, controller or power supply has stopped working, start with access control repair. Diagnosis determines whether a component repair is practical. A new installation or system replacement is a separate scope, discussed before any upgrade is approved.

Access control for Long Island properties

For Nassau and Suffolk projects, send the town, ZIP code, entrance photographs, door count and approximate user count. Tell us whether you are replacing keys, adding another door to an existing system or installing a new system. Model labels and information about existing network equipment help define the next step.

If visitors also need to call residents or reception, compare intercom installation on Long Island with the planned credential system. A failed reader or door release on an existing entrance can be assessed through access control repair before a complete new installation is proposed.

What to confirm at handover

The approved scope should identify credential setup, schedules, administrator ownership and training. Test authorized entry, the agreed exit method and the normal door-closing cycle. Confirm how staff or management will add users, remove lost credentials and obtain help with the selected system.

Questions about your installation or service

Can an existing door be used for access control?

Often, but the door, frame, closer, lock preparation and proposed release device need to be checked for compatibility and condition.

Can you install key-fob entry for a small office?

Yes. Send the office location, door count and approximate user count. We review the entrance and how access permissions will be administered.

Should I choose a magnetic lock or an electric strike?

The answer depends on the door and frame, existing latch, exit arrangement and project requirements. We review the actual entrance before specifying hardware.

Can an intercom work with the new entry system?

A compatible intercom can connect to an approved release interface. The intercom, controller, power and locking hardware should be planned together.

Is same-day installation available?

Call to confirm availability. Some service work can be scheduled the same day; a new system may need equipment, wiring work and a separate installation appointment.

Choose the manufacturer and exact model

A useful specification identifies the door, required entry methods, connected systems and who will administer users. Product options from different manufacturers should be compared against those requirements before ordering.

If you already have equipment or are considering a product from another country, send the model number, product link and photos. We can review the proposed installation, compatibility and any additional work before accepting the scope.

What We Check for Access Control

Inspection and service scope

Access control must work with the physical door before software features matter. We identify the door and frame material, existing lock, handing, traffic pattern and release requirements. That information guides the choice between an electric strike, magnetic lock or another compatible locking method, along with the reader, controller and power supply.

Recommended Work

The scope can also include credential management, request-to-exit devices, door position monitoring and intercom integration. We plan cable routes and equipment locations around the property, then explain how users will enter, exit and be added or removed from the system after installation.

How to Schedule Service

Call or send photos with your ZIP code. We confirm availability and arrange an inspection when needed. We explain the recommended work and price before you approve the job.

Service options and cost factors

Access control

Card reader installation and key fob entry system installation need a plan for credential administration. Magnetic lock installation and electric strike installation use different mounting and locking approaches. Equipment must be selected for the actual entrance and release requirements.

Access control installation cost depends on the number of doors, cable routes, locking hardware, power and management features. Confirm any manufacturer subscription separately from installation work.

A final price requires the actual scope. Call or send photos and your ZIP code to discuss the next step.

Ready to schedule?

Send photos and your ZIP code, or call 770 Doors & Windows directly.

Call (347) 541-4824

Questions about this service

Access Control Installation by neighborhood

Brooklyn
Queens
Manhattan
Bronx
Staten Island

Plan permissions and account ownership before installation

Start with a list of entrances, who uses each one and the hours when access is needed. A shared lobby, staff door and equipment room can require different permissions. Include how visitors and deliveries are admitted.

Before an upgrade, identify the existing readers, credentials and administrator account. Compatibility depends on the actual models and configuration; an existing card is not automatically compatible with a replacement reader.

Include these items in the handover

  • An authorized property representative owns the administrator account.
  • Adding a user, cancelling a lost fob and removing a departed user are demonstrated.
  • The agreed access schedules are checked at the intended doors.
  • Installed model details, support contacts and any software requirements are documented.

Help with the problem you are seeing

Review the symptom, what may cause it and what to describe when you request service.

Access and door-release work on real properties

Original photos and video stills from magnetic locking and remote-controlled entrance work on Long Island.

Overhead magnetic lock at the completed glass office entrance on Long Island, ZIP 11797
Glass office entrance and overhead magnetic locking hardware.

Long Island, NY 11797

Magnetic lock replacement

Service need
Magnetic lock replacement at a commercial glass office entrance in Long Island ZIP 11797.
Entrance arrangement
The entrance combines an overhead magnetic lock, a card reader and a push-to-exit button.
Work completed
The magnetic locking hardware was replaced at the existing glass entrance.
Result shown
The photos and video show the fitted overhead magnetic lock and the way the locking hardware meets the glass door.
View the original project recording
Checks for similar service

For a similar service, confirm the following with your technician:

  • Test entry release with an authorized credential.
  • Test the installed exit-release controls.
  • Confirm that the door closes into position and the lock re-engages.
Original video still of the remote-controlled glass entrance on Long Island
The original recording shows remote-controlled entry through this door.

Long Island, NY

Remote-controlled glass entrance

Service focus
Remote-controlled release at a glass entrance on Long Island.
Visible arrangement
A handheld remote is used at the existing glass entry door.
Work shown
The footage demonstrates the remote-controlled entrance arrangement at the property.
Check shown
The video shows use of the handheld remote followed by entry through the glass door.
View the original project recording
Checks for similar service

For a similar service, confirm the following with your technician:

  • Confirm that the authorized remote releases the correct entrance.
  • Check door movement and closing after release.
  • Confirm that the entrance returns to its intended locked state.

BEFORE YOU BOOK

Price, scheduling & support.

Licensed for Access Control Services

Planning a new installation?

Request a free on-site estimate. We review the property and explain the proposed work and price before approval.

Request an installation estimate

Need a repair?

$250 diagnostic service visit

Describe what stopped working and send photos. Confirm the agreed repair scope and any additional charges before work begins.

Discuss the repair: (347) 541-4824
What determines the price?

Door count, the existing lock and closer, cable routes, power supplies, readers or keypads, and credential administration determine the scope. Identify equipment, labor, account setup and any ongoing manufacturer charges in the estimate.

Can the work be completed in one visit?

An adjustment or compatible hardware repair can have a different schedule from a new controlled-entry system. Parts availability, access to the wiring route and building work hours affect completion. Confirm the appointment and expected sequence before installation.

What should I review at handover?

Review entry with authorized credentials, the installed exit-release controls, closing and re-engagement. Confirm how an administrator adds or removes a user and who owns the system account.

What about warranty and help after service?

770 provides a 12-month workmanship warranty. Confirm the covered work and any exclusions in your written estimate. Equipment manufacturer warranties have their own terms.

For follow-up on a 770 job, call (347) 541-4824. Have your invoice or job reference ready and describe what changed. Photos and a readable model label can help identify the equipment.

Send photos and your ZIP for an initial review. Site conditions and compatibility are confirmed before a final scope is approved.

Service locations and related guides

Browse service areas and related repair or installation options

Access control installation for Long Island properties

Cards, fobs and keypads

Plan who needs entry, the number of controlled doors and how credentials will be issued and removed. Office and building systems can use card readers, key fobs or keypad entry; the choice depends on the entrance, users and administrator needs.

Magnetic locks, strikes and remote entry

We review door alignment, frame space, existing hardware, cabling, power and the required release path before selecting a magnetic lock or electric strike. Remote entry and intercom release must work with the selected controller and locking hardware. The final scope includes review of the required exit and emergency-release arrangements.

Installation and handover

Send entrance photos, the door count, ZIP code and any existing equipment labels. Installation planning covers equipment compatibility, wiring routes, access schedules and administrator handover. If an existing system has stopped working, request access control repair instead.

Areas included in this service guide

Send your ZIP code and property details so we can confirm the service scope and schedule.

  • Great Neck Plaza, Nassau County 11021
  • Baldwin, Nassau County 11510
  • Glenwood Landing, Nassau County 11547
  • Albertson, Nassau County 11507
  • Glen Cove, Nassau County 11542
  • Cedarhurst, Nassau County 11516
  • Freeport, Nassau County 11520
  • Bayville, Nassau County 11709
  • Carle Place, Nassau County 11514
  • Elmont, Nassau County 11003
  • Syosset, Nassau County 11791
  • Massapequa, Nassau County 11758
  • Bethpage, Nassau County 11714
  • Plainview, Nassau County 11803
  • Atlantic Beach, Nassau County 11509
  • Hewlett, Nassau County 11557
  • Merrick, Nassau County 11566
  • Bellmore, Nassau County 11710
  • Garden City, Nassau County 11530
  • Greenvale, Nassau County 11548
  • Manhasset, Nassau County 11030
  • Jericho, Nassau County 11753

Access Control Repair · Intercom Installation Long Island · Intercom Repair Long Island · Smart Lock Installation · Security Camera Installation · Long Island Area Coverage

Call (347) 541-4824 or send a service request.

Call NowWhatsApp